WHO USES... ?

Foundries / Metalcasting:

Chipmate Metal Putty reduces costly rejects in foundry production.
Fill aluminum casting porosity spots with Chipmate Metal Putty.
Repair gouged or worn core boxes with Hi-Temp Chipmate Metal Putty.
Patch dents and rough spots on metal castings (aluminum & iron) with Chipmate Metal Putty.
Fill blow holes, sand holes and metal surface defects with Chipmate Metal Putty.
Repair or alter wood and metal patterns with Chipmate Metal Putty.
Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto patterns to prevent warping and checking.
Brush or spray Chipmate Metal Putty onto castings for a smooth, metallic finish prior to painting.
Chipmate Metal Putty and Hi-Temp Chipmate Metal Putty are used to fill seams or dents prior to powder coating.
Chipmate Metal Putty is used to coat wood patterns for 300% higher abrasion resistance.
Chipmate Metal Putty is paintable, rustproof, and water-resistant.
Chipmate Metal Putty may be pigmented to darker shades of gray to match gray iron.

Welding:

Chipmate Metal Putty cosmetically repairs damaged metal where welding is impractical or infeasible.
Chipmate Metal Putty seals porosity in welds
Fill metal doors, windows, frames and other metal surface defects with Chipmate Metal Putty.
Finish weeping welds and fill tack-welded seams with Chipmate Metal Putty.
Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
Use Chipmate Metal Putty as a rustproof, water-resistant protective coating on water or fuel storage tanks.
Repair metal roofs and all kinds of piping with Chipmate Metal Putty.
Fill cavitation pits in fin assemblies, Francis runners and other propellers with Chipmate Metal Putty.
Repair motor and engine blocks, as well as leaking oil pans with Chipmate Metal Putty.
Repair manifolds and exhaust systems with Hi-Temp Chipmate Metal Putty, originally formulated for foundries but used for numerous high-temperature repairs in industry.
Patch fuel tanks (unable to withstand the heat of welding) with Chipmate Metal Putty, which is impervious to gasoline.

Bearings / motion control industry:

Repair gouged or damaged shafts with Chipmate Metal Putty prior to replacing new races and bearings.
Repair stripped threads with Chipmate Metal Putty.
Build up worn shafts with Chipmate Metal Putty.
Fill over-bored holes with Chipmate Metal Putty and re-drill and tap.
Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.

Industrial:

Chipmate Metal Putty is a proven filler used in metalworking plants since 1950.
Chipmate Metal Putty fills metal doors, windows, frames and other metal surface defects.
Repair metal roofs and all kinds of piping with Chipmate Metal Putty.
Repair worn or damaged equipment and machinery with Chipmate Metal Putty.
Repair metal furniture with Chipmate Metal Putty.
Build up worn tracks on industrial equipment with Chipmate Metal Putty.
Patch industrial ovens with Hi-Temp Chipmate Metal Putty.
Patch ducts and vents with Chipmate Metal Putty.
Build up worn shafts with Chipmate Metal Putty.
Fill over-bored holes with Chipmate Metal Putty and re-drill and tap.
Fill holes in metal fabrications, including doorways and metal door seams, with Chipmate Metal Putty.

Construction & Transportation:

Repair mufflers with Hi-Temp Chipmate Metal Putty.
Patch automotive, heavy equipment and machinery fuel tanks with Chipmate Metal Putty.
Repair cracked auto/truck/contractor machinery engine blocks with Chipmate Metal Putty.
Coat and finish damaged metal roofs on train gondola cars, trucks and trailers with Chipmate Metal Putty.
Fill damaged and pitted turbines in power generation plants with Chipmate Metal Putty.
Fill handrail seams and metal banisters with Chipmate Metal Putty.

Marine:

Fill holes in metal masts with Chipmate Metal Putty when relocating attachments.
Patch and finish gouged metal surfaces with Chipmate Metal Putty.
Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
Use Chipmate Metal Putty as a rustproof, water-resistant protective coating on water or fuel storage tanks.
Fill cavitation pits on fin assemblies, Francis runners and other propellers with Chipmate Metal Putty.
Seal leaking seams in aluminum boats with Chipmate Metal Putty.
Repair boat engine blocks with Chipmate Metal Putty.
Repair leaking oil pans with Chipmate Metal Putty.
Repair cracked inboard engine blocks with Chipmate Metal Putty.
Repair manifolds and exhaust systems with Hi-Temp Chipmate Metal Putty, originally formulated for foundries but used for numerous high-temperature repairs in industry.

Plumbing & Heating (HVACR):

Fill pump housings and metal surface defects with Chipmate Metal Putty.
Patch holes in all kinds of piping (even PVC) with Chipmate Metal Putty.
Patch low-pressure steam lines with Chipmate Metal Putty.
Patch ductwork and vents with Chipmate Metal Putty.
Seal leaking radiators and heaters with Chipmate Metal Putty.
Repair cracked boilers with Chipmate Metal Putty.
Repair leaking pipes, water and fuel tanks with Chipmate Metal Putty.
Repair damaged flanges with Chipmate Metal Putty prior to installation of new gasketing.

Agriculture:

Patch farm tractor fuel tanks and worn plow blades with Chipmate Metal Putty.
Repair stripped threads with Chipmate Metal Putty.
Repair water tanks and watering troughs with Chipmate Metal Putty.
Repair cracked tractor engine blocks and oil pans with Chipmate Metal Putty.
Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto metal surfaces for a rustproof, water-resistant metal finish that can be painted over.
Fill seams or dents with Chipmate Metal Putty.
Coat or patch leaks in metal troughs, roofs, gutters and downspouts with Chipmate Metal Putty.
Build up worn shafts with Chipmate Metal Putty.
Fill over-bored holes with Chipmate Metal Putty and re-drill and tap.
Repair holes in irrigation pipes with Chipmate Metal Putty.

Woodworking:

Thin Chipmate Metal Putty with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
Repair wooden patterns with Chipmate Metal Putty.
Repair wooden boat screw-holes and other stripped threads with Chipmate Metal Putty.

Paint & Powder Coating:

Chipmate Metal Putty withstands temperatures as high as 425ºF for one-time exposures for no longer than 20 minutes
Hi-Temp Chipmate Metal Putty withstands temperatures greater than 350ºF, up to 1000ºF!
Use Chipmate Metal Putty or Hi-Temp Chipmate Metal Putty to fill dents in metal parts to be liquid or powder coated.
Repair damaged parts or build up worn parts with Chipmate Metal Putty before painting or powder coating.
Use Chipmate Metal Putty as a protective metallic paint or coating by thinning with Lab-solvent and applying with a paint brush or spray equipment.

Do-It-Yourself ~ Hardware & Home Center:

Repair holes in lawn mower housings with Chipmate Metal Putty.
Repair leaking gutters with Chipmate Metal Putty.
Repair metal roofs with Chipmate Metal Putty.
Repair wood stoves with Hi-Temp Chipmate Metal Putty.
Repair PVC irrigation piping, PVC pool water lines and pool pumps with Chipmate Metal Putty
Repair aluminum boats with Chipmate Metal Putty.
Repair rusted tree stands, bird feeders / baths with Chipmate Metal Putty.
Repair incorrectly drilled holes in metal pipes and tubes with Chipmate Metal Putty.
Repair leaking gasoline tanks with Chipmate Metal Putty.